Round Pipe-manufacture,factory,supplier from China

Descriptive：Deformed Round bars, also known as Deformed Reinforcing Steel Bars, offer significant advantages over traditional Barexposed Rebar in construction applications. These bars are designed with enhanced deformations along their surface, which improve the bonding strength with concrete and enhance structural stability. The unique design of Deformed Round bars provides superior load-bearing capacity and resistance to slippage compared to Barexposed Rebar.

Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235, 16Mn, 20 Mnsi and other raw materials to choose fromSpecificationDiameter(±0.5)33mm39mm 40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235，16Mn，20 MnsiWeldingThe retaining ring interface has no cracks, no slag inclusions, and no burning through the pipe wallAssembleRetaining ring and Split Sets Anchor body to assembleQuality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the p

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme

Product Details:Anchor disk is an important part of mine support, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. They are fixed inside the surrounding rock by anchors to change the mechanical state of the surrounding rock and form a stable rock belt, which maintains the stability of the roadway through the joint action of anchors and surrounding rock.In mine support, anchor pan is an active defensive support method, representing a major change in the field of mine support.

Product DetailsNowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway.

Product details: Anchor disk is a kind of support equipment, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. Through the use of anchor disk and anchor rods, the mechanical state of the surrounding rock can be changed, so as to form a whole and stable rock band around the roadway, thus maintaining the stability of the roadway.

Product details:There are two main types of anchor disks: square round hole anchor disks and round round hole anchor disks. By combining with the anchor rods inside the surrounding rock, the anchor disk changes the mechanical state of the surrounding rock itself, so as to form a whole and stable rock belt around the roadway. The purpose of maintaining the stability of the roadway is achieved by the joint action of the anchor rods and the surrounding rock.In the field of mine support, anchor pan is widely used as an active defense support method.

Product Details:Nowadays the widely used anchor disk mainly includes square round hole anchor disk and round round hole anchor disk. The function of the anchor disk is to change the mechanical state of the surrounding rock through the anchors, which makes a whole and stable rock band around the roadway. The anchors work together with the surrounding rock to maintain the stability of the roadway.Anchor plates are considered an active support method in mine support and can be considered a major change in the field of mine support.

Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.

Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.

Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.

Product DescriptionMain technical performance: Initial anchoring force: 3~7 tons; Pipe ring pull-off load: 8~10 tons; Anchor pipe pull-off resistance: 12~13 tons; Corrosion resistance is 20~30% higher than that of A3 steel, which is conducive to long-term use.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345  Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.

Product details:Anchor disk is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. Anchor plate changes the mechanical state of the surrounding rock through the anchors inside the surrounding rock, forming a whole and stable rock belt to maintain the stability of the roadway. Through the joint action of the anchor rods and the surrounding rock, the anchor plate can achieve the purpose of maintaining the stability of the roadway. In mine support, anchor pan is a proactive support method and is considered a major change in the field of mine support.

Product DetailsHollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of two ~ 3mm), can be at once alongside the gap to the eighty ~ 100cm vary of radial strain on the gap wall and the friction produced via the layer to stop the surrounding rock sliding down, coupled with the anchor tray tray bearing force.

Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.

Product Details Of Butterfly Anchor PlateIn recent times there are  primary sorts of anchor disk widely used, square round hollow anchor disk and spherical round spherical hole anchor disk. anchor disk is to exchange the mechanical nation of the surrounding rock itself through the anchors in the surrounding rock, to form an entire and strong rock belt across the roadway, using the anchors and the encircling rock collectively to achieve the purpose of preserving the steadiness of the roadway.

Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.

Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Product description: Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.Specifications and parameters：Pallet Size（mm）carrying capacity(kn)Pallet Size（mm）carrying capacity(kn)note120x120x5≧100200x200x10≧360Partial specifications120x120x6≧115200x200×12≧420120x120x8≧130250x250×8≧320150x150×5≧135250x250x10≧400150x150x6≧170250×250x12≧440150x150x8≧230300x300x10≧420150x150x10≧290300x300x12≧480120x120x10≧260300x300x14≧520Usage:Anchor disk and ancho

Product Details:Slit Tube Metal Anchor is an anchor product manufactured through the use of sheet metal rolled and pressed into a tubular rod with longitudinal slits. This type of anchor prevents the surrounding rock from sliding by drilling holes into the rock that are slightly smaller than the diameter of the anchor, realizing that radial pressure is exerted around the holes and generating friction.

Product DetailsRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the most basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Anchor Tray DescriptionAn anchor tray is a fixing device used in coal mines that is made from a high-strength steel tube with longitudinal slits. It is installed in drill holes slightly smaller than the diameter of the pipe, which immediately exerts radial pressure on the hole wall and stops the surrounding rock from sliding down. At the same time, the pallets of the anchor tray provide additional load-bearing capacity. In this way, the surrounding rock is under three-way stress.