Round Metal Tubing-manufacture,factory,supplier from China

Descriptive：Deformed Round bars, also known as Deformed Reinforcing Steel Bars, offer significant advantages over traditional Barexposed Rebar in construction applications. These bars are designed with enhanced deformations along their surface, which improve the bonding strength with concrete and enhance structural stability. The unique design of Deformed Round bars provides superior load-bearing capacity and resistance to slippage compared to Barexposed Rebar.

Product Details:Anchor disk is an important part of mine support, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. They are fixed inside the surrounding rock by anchors to change the mechanical state of the surrounding rock and form a stable rock belt, which maintains the stability of the roadway through the joint action of anchors and surrounding rock.In mine support, anchor pan is an active defensive support method, representing a major change in the field of mine support.

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Product Details:Slit Tube Metal Anchor is an anchor product manufactured through the use of sheet metal rolled and pressed into a tubular rod with longitudinal slits. This type of anchor prevents the surrounding rock from sliding by drilling holes into the rock that are slightly smaller than the diameter of the anchor, realizing that radial pressure is exerted around the holes and generating friction.

Product DetailsNowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway.

Product details:There are two main types of anchor disks: square round hole anchor disks and round round hole anchor disks. By combining with the anchor rods inside the surrounding rock, the anchor disk changes the mechanical state of the surrounding rock itself, so as to form a whole and stable rock belt around the roadway. The purpose of maintaining the stability of the roadway is achieved by the joint action of the anchor rods and the surrounding rock.In the field of mine support, anchor pan is widely used as an active defense support method.

Product details: Anchor disk is a kind of support equipment, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. Through the use of anchor disk and anchor rods, the mechanical state of the surrounding rock can be changed, so as to form a whole and stable rock band around the roadway, thus maintaining the stability of the roadway.

Product Details:Nowadays the widely used anchor disk mainly includes square round hole anchor disk and round round hole anchor disk. The function of the anchor disk is to change the mechanical state of the surrounding rock through the anchors, which makes a whole and stable rock band around the roadway. The anchors work together with the surrounding rock to maintain the stability of the roadway.Anchor plates are considered an active support method in mine support and can be considered a major change in the field of mine support.

Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.

Product details:Anchor disk is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. Anchor plate changes the mechanical state of the surrounding rock through the anchors inside the surrounding rock, forming a whole and stable rock belt to maintain the stability of the roadway. Through the joint action of the anchor rods and the surrounding rock, the anchor plate can achieve the purpose of maintaining the stability of the roadway. In mine support, anchor pan is a proactive support method and is considered a major change in the field of mine support.

Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.

Product Details Of Butterfly Anchor PlateIn recent times there are  primary sorts of anchor disk widely used, square round hollow anchor disk and spherical round spherical hole anchor disk. anchor disk is to exchange the mechanical nation of the surrounding rock itself through the anchors in the surrounding rock, to form an entire and strong rock belt across the roadway, using the anchors and the encircling rock collectively to achieve the purpose of preserving the steadiness of the roadway.

Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Product description: Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.Specifications and parameters：Pallet Size（mm）carrying capacity(kn)Pallet Size（mm）carrying capacity(kn)note120x120x5≧100200x200x10≧360Partial specifications120x120x6≧115200x200×12≧420120x120x8≧130250x250×8≧320150x150×5≧135250x250x10≧400150x150x6≧170250×250x12≧440150x150x8≧230300x300x10≧420150x150x10≧290300x300x12≧480120x120x10≧260300x300x14≧520Usage:Anchor disk and ancho

Product DetailsRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the most basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.

Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.

Resin anchor product introductionResin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like bonding material, with special polyester film will be divided into two-component packaging with the curing agent medicine volume. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance.

Product details:Anchor pan is a kind of equipment used for roadway support, which changes the mechanical state of the surrounding rock through the joint action of anchor rods and surrounding rock to maintain the stability of the roadway. The anchor plate makes the roadway form a whole and stable rock belt around the roadway, thus preventing the surrounding rock from loosening and deformation, and protecting the roadway from the influence of geological forces.

335 Resin Anchor DescriptionMSGLW series of longitudinal ribless threaded steel resin anchor metal rod products are widely used in underground rock, semi-coal rock and coal tunnel anchor support, especially suitable for underground tunnel and refuge support under complex conditions.

Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235, 16Mn, 20 Mnsi and other raw materials to choose fromSpecificationDiameter(±0.5)33mm39mm 40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235，16Mn，20 MnsiWeldingThe retaining ring interface has no cracks, no slag inclusions, and no burning through the pipe wallAssembleRetaining ring and Split Sets Anchor body to assembleQuality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the p

Split Bolt Set Description:1. Split Bolt (Bolt): mainly responsible for connecting structural components, usually made of high-strength metal materials with certain tensile and torsional strength.2. Nut (Nut): used to fix the position of the bolt, usually made of metal materials, need to be used in conjunction with the bolt when connecting.3. Washer: Used to increase the connection area, dispersing the connection pressure, preventing damage to the structural parts, usually made of metal or plastic materials.4.

Slit Tube Anchor OverviewSlit pipe metal anchor is a diploma of metal plate rolled and pressed into a tube with longitudinal seams,it is a new sort of self-anchoring anchor that actively reinforces the surrounding rock of laminar development. It is a new form of self-anchoring anchor that actively reinforces the rock with developed laminations like an increase nail firmly nailed to the surrounding invulnerable rock layer. The compression stress per meter of the anchor into the borehole is about 25kN, and the anchoring strain generated is roughly equal to the compression force.

Anchor Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor. The role of the tray is to transfer the thrust force generated by the nut locking torque to the top gang to generate the initial anchor force, and at the same time transfer the pressure of the roadway top gang to the anchor rod to generate the working resistance, which together reinforce the surrounding rock and stop the displacement of the roadway top gang.